4 Meter Boom Gate Barrier Traffic Lights Secure Access Control Kit with Double (Red/Green) Traffic Signal LED Lights (Made in Italy by Stagnoli), Two Remote Controls, Retro Reflective Safety Sensor and External 24V Transformer with 20m Low Voltage Cable | Ultra High-Speed 24V APC V2 NUUR4, Universal Boom Barrier. Car Parking Secure Access Control System, Made in Italy

APC V2 NUUR4 ULTRA FAST 24V Boom Barrier / Boom Gate / Parking Barrier, Car Parking Access Control 

Ultra-low power consumption. Suitable for solar-powered systems.

24V Ultra Fast-Opening Automatic Raise Arm Barrier/Boom Gate

24V rapid opening automatic raise arm barrier for residential and multiple-use installations up to 4m width

Boom Barrier / Boom Gate / Parking Barrier, Car Parking Access Control APC V2 NUUR4, Universal Boom Gate Ultra High-Speed 24V DC, 4 Meter Barrier Made in Italy

• Accurate and safe operation with encoder
• Obstacle detection
• Self-learning of opening and closing times
• Slow-down in the limit switch area
• Balancing spring included
• White painted aluminium bar (accessory)
• Digital control unit programmable using three program buttons and display
• Plug-in adaptor for modular receiver
• ADI connector for APC Infinity WiFi module that allows control of the barrier with the Mobile APP
• Input for photocells with self-test function
• Input for mechanical safety edges
• Courtesy light output
• Holding magnet output
• Energy Saving function to minimise consumption in standby mode
• Programmable acceleration and deceleration
• Operation in case of absence of power using the backup battery
• Operation with solar power using the ECO-LOGIC system

Motor Overview / Balancing Spring System

Technical Features

• Power supply (Vac - Hz): 230 V~ 50 Hz
• Motor power supply (Vac - Hz):  24 Vdc
• Maximum electric power (W): 300W
• Opening time (s): 3 Seconds for 4 Meter Boom Arm
• Working temperature (°C): Between -20° to +55°
• Duty cycle % - (max. cycles/hour): 80% - (300)

Control Panel

• Digital control unit programmable using three program buttons and display
• Plug-in adaptor for receiver 
• ADI connector for APC Infinity WiFi module that allows control of the barrier with the Mobile APP

Dimensions

Universal Boom Gate (Pre-Configured Right Hand Side) Ultra High-Speed 24V DC, 4 Meter Barrier Made in Italy

APC V2 NUUR Universal Boom Gate Operator – High-Speed Italian Access Control

APC V2 NUUR 24V Universal Boom Gate Operator | Italian Made | AutoMotion Plus

Control vehicle access with the APC V2 NUUR. Italian-made, 24V ultra-fast boom gate (4m/6m). Features obstacle detection, solar readiness & smartphone control.

The Ultimate Solution for Secure Vehicle Access in Australia

The APC V2 NUUR Universal Boom Gate Operator represents the pinnacle of Italian engineering, designed specifically to meet the rigorous demands of Australian commercial and residential access control. Whether managing a busy corporate car park in City Centre (Sydney, Melbourne, Brisbane, Perth, Adelaide, Canberra, Hobart, etc.) or a remote solar-powered industrial site in Western Australia, or a farm across all of AU, the V2 NUUR delivers unmatched speed, reliability, and intelligence.

Available in 4-meter (NUUR4) and 6-meter (NUUR6) configurations, this 24V DC operator is built for high-duty cycles (80%), ensuring continuous operation during peak traffic hours. Its universal design allows for easy left or right-hand installation, making it the most versatile barrier on the market.

Equipped with advanced digital control, the V2 NUUR offers smooth acceleration, precise deceleration, and integrated obstacle detection for maximum safety. With the APC Infinity Wi-Fi module (optional), users can unlock smart features such as geolocation-based opening and scheduled access directly from their smartphones, modernising how Australia manages vehicle flow.

Key Features

• Italian Reliability: 100% manufactured in Italy, ensuring superior build quality and longevity.

• Ultra-High Speed: Opens in as fast as 3 seconds (4m model) or 5 seconds (6m model) for rapid traffic flow.

• Universal Configuration: innovative design allows the arm to be installed on either the Left or Right side effortlessly.

• 24V DC Motor: High-efficiency low-voltage motor supports 80% duty cycle (up to 300 cycles/hour).

• Solar Ready: Fully compatible with the ECO-LOGIC solar system, perfect for remote Australian locations without mains power.

• Smart Safety: Built-in encoder provides obstacle detection, self-learning opening times, and soft-stop technology.

• Smartphone Control: Compatible with APC Infinity Wi-Fi for App-based control, Geo-fencing, and user management.

• Power Failure Proof: Optional battery backup ensures the gate operates even during blackouts.

Quick Reference Product Table

Technical Data Sheet

FAQ (APC V2 NUUR Universal Boom Gate Operator)

Q: What is the best boom barrier gate for high-traffic car parks in Australia?

A: The APC V2 NUUR is a top contender due to its 80% duty cycle and fast opening speeds (3-5 seconds). It is designed to handle the frequent entry and exit requirements of Australian commercial buildings and shopping centres without overheating.

Q: Can I install a boom gate in a location without mains power?

A: Yes. The APC V2 NUUR 24V system is compatible with the ECO-LOGIC solar power system. This makes it the best boom gate solution for remote industrial sites, farm entrances, or mining camps in Australia, where running cables is too expensive.

Q: How does the "Universal" feature work on this boom gate?

A: Unlike many competitors that require you to buy a specific "Left" or "Right" hand unit, the APC V2 NUUR is universal. You can swap the arm installation side on-site, providing flexibility if site conditions change.

Q: Is this boom gate compatible with smartphone opening?

A: Absolutely. By adding the APC Able Infinity Wi-Fi Module, you can use the Able to Use App to open/close the gate via Smart App, and you can even use Geo-Location (opening automatically as you approach), creating a seamless and secure access experience. You can download the free mobile application for Android and IOS devices from the official stores (Google Play, Apple App Store)

Q: What safety features are required for boom gates in Australia?

A: Australian safety standards rely on minimising risk. The V2 NUUR features encoder-based obstacle detection (reversing if it hits a car/person) and supports external safety devices, such as Retro Reflective Safety Sensors and Loop Detectors, to prevent the arm from closing on vehicles.

APC Automation Systems FOUR Button Keyring Remote Control

Four-button remote control transmitter used for operating the boom gate system for OPEN - STOP - CLOSE commands. The remote can be paired to other APC boom gates on the same site or diffrent sites using any of the vacant or unused buttons.  

APC-RR-11 Retro Reflective Sensor

The retro-reflective Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.

If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position.

The sensor ( which is the transmitter and receiver) is wired back to the control box of the gate system using the pre-connected cable. There is no requirement for wiring across the driveway using this type of sensor.
 

• Up to 11 Metres Infrared beam operating distance


• Only powers on when the command is given to close the gates


• Alignment & Misalignment led to assist in the installation process


• Resin filled for the ultimate weatherproofing

Double Traffic Lights | Red&Green Trafic Light Flow Control

APOLLO traffic light series with two lights (Red and Green), 24 V AC/DC, vandal-resistant, and IP66.

Used in parking lots, logistic areas, and industrial plants.

Traffic Control Light, Twin, Red & Green

24v Apollo Trafik Light Made in Italy by Stagnoli

Red and Green Dual Traffic Light for Easy Traffic Flow Control to Use Car Parks, Commercial, Residential, Public Events and Organizations)

Technical Specification:

• Number of LEDs: 25
• Brightness: 50Lux
• Lens size: 120mm
• Power supply: 24v
• Protection: IP66 / Vandal-resistant

Automotion Plus Traffic Signal Light Solutions

Commercial: LED Traffic Signal Lights Australia, Car Park Traffic Light System, Boom Gate Traffic Light Kit, Driveway Red-Green Signal Light, Industrial Traffic Light Indicator, Warehouse Traffic Control Lights, Custom Traffic Signal Solutions. Traffic Light Signal System with Integrated Advanced Access Control Solutions

Solution/Intent: Single-lane Car Park Signal Lights, Commercial Access Control Traffic Lights, IP65 Weatherproof Traffic Signal, Automatic Gate Traffic Light Indicator, Tailored Traffic Control Solutions Australia. Advanced Access Management Solutions with Traffic Light and Signal Controller System

LED Traffic Signal Lights & Car Park Control Systems Australia | Automotion Plus

Browse heavy-duty LED traffic signal lights for car parks, boom gates, driveways, and industrial sites. Ultra-bright red/green signal indicators engineered for Australian conditions. Speak to our experts for a tailored solution today.

| [email protected] | 1800 694 283 | 

Commercial LED Traffic Signal Light Solutions

Streamline Access & Boost Safety with Industrial LED Traffic Signals

Automotion Plus supplies high-performance LED Traffic Signal Lights and Access Control Signal Indicators engineered specifically for Australian commercial, industrial, and residential environments. Designed for seamless integration with automatic driveway gates, boom barriers, garage access controls, and single-lane car parks, our LED signal lights deliver clear, high-visibility guidance to reduce traffic congestion and prevent accidents.

Whether you need a compact dual red-green indicator for a basement car park or a heavy-duty multi-lens traffic lantern for industrial loading docks, our solutions are built with IP65-rated weatherproof housings, energy-efficient LED arrays, and long service life.

Why Choose Automotion Plus Traffic Light Systems?

• Ultra-Bright Optical Visibility: High-intensity LED technology ensures maximum contrast and visual recognition even in direct sunlight, dark underground basements, or heavy weather.

• Seamless Automation Integration: Effortlessly connects with boom gates, motorised bollards, automatic sliding and swing gate openers, vehicle loop detectors, and access control keypads.

• Rugged IP65 Weatherproof Housings: Heavy-duty polycarbonate and aluminium casings built to withstand harsh Australian outdoor UV, heat, rain, and dusty warehouse environments.

• Low Power Consumption & Maintenance: Modern LED technology reduces operating costs and provides long, maintenance-free operational life compared to traditional halogen signal lanterns.

• Custom Engineering & Expert Advice: Every site has unique operational demands. Our team of experts can tailor a solution to your exact requirements—from simple driveway indicators to multi-level commercial traffic control systems.

Traffic Light Solutions by Application

Need a Specialized Configuration? No two traffic access setups are identical. Contact Automotion Plus today—our experts can tailor a traffic signal light solution to your specific site requirements. | [email protected] | 1800 694 283 | 

Frequently Asked Questions (FAQ)

Q1: How do traffic lights work with single-lane car park setups?

A: In single-lane car park control systems, a dual red/green LED traffic light works alongside e-loop(V4) wireless vehicle induction loop detectors or photo-beams. When a vehicle approaches, the system sets the entrance light to green and the exit light to red, preventing opposing vehicles from entering the narrow pass simultaneously.

Q2: Are Automotion Plus traffic signal lights suitable for outdoor Australian conditions?

A: Yes. All traffic lights supplied by Automotion Plus carry IP65 dust and water ingress ratings with UV-stabilized housings to ensure long-term reliability in harsh Australian climates.

Q3: Can traffic lights be synchronised with boom barrier gates?

A: Absolutely. Our red/green LED traffic signal kits integrate directly with automated boom gate control boards. The red signal stays active while the boom arm is down or in motion, changing to green only when the barrier arm is fully raised.

Q4: What if I have a complex site setup or non-standard requirements?

A: We offer full technical consultation. Our experts can tailor a traffic signal solution to your exact requirements, ensuring complete compatibility with your existing controllers, sensors, and access protocols. 

Need a Specialised Configuration?
Please contact our experts, who can tailor a traffic signal light solution to your specific site requirements.

| [email protected] | 1800 694 283 | 

External Transformer (Extendable up to 80 metres cable distance)

24V External weatherproof designed to be used in a low voltage cabling application of up to 80 meters, supplied with a pre-connected 20-meter cable. This is a perfect solution when running mains power to the gate is not viable due to costs, difficulty or simply to DIY.

Specifications

Type: Remote External Transformer 

Input voltage: 240V AC

Output Voltage: Low Voltage 24v AC

Amperage: 10A

Input connection: Plug With 1m 240AC Pre-Connected Cable

Output connection: 20m Pre-Connected Cable (Extendable up to 80 metres)

Suitability: Outdoor use, 10amp Power-Point