Bi-folding Space-Saving Feature Double Swing Gate Hardware (CAIS) with DC Powered Automatic Electric Gate Automation Kit Italian Made APC-ABLE-3000x2 Heavy Duty Linear Actuator, APC-ABLE-EVO2 24V Digital Control Unit and Remote Controls (Gates are not included)

Bi-Folding Double Swing Gate Hardware (Central Hinges Included)

For Single Leaf

• Max Lenght 3m,
• Max Height 2m,
• Max Weight 110kg,

⚠ Gates are not included.

Trackless Bi-Folding Driveways Swing Gate Hardware, Space-Saving Feature, All-In-One Box

FREE UP EXTRA SPACE

A traditional type swing-gate use up to 100% more backspace in its opening and closing if compared with bi-folding swing gates. Meaning that the standard space taken up by a conventional swing gate will be free to utilise in some other way. The CAIS TWIN DRIVE bi-folding hardware is particularly useful in places where space is at a premium, such as urban areas with high population density. The traditional swinging gate will take up valuable space and can be quite inconvenient to use at times. The CAIS TWIN DRIVE bi-folding system will free up more space for vehicles or foot traffic.

The Installation Steps | Bi-folding Driveways Swing Gate Complete Hardware 

The installation does not require complicated steps and materials. No welding is required; therefore, the working time is not too long. We invite you to follow the below installation steps. 

Other Benefits of Bi-Folding Gate Hardware (Swing Gate Leaf Twin Drive)

Swing Gate Bi-Folding TWIN DRIVE is an ideal solution for driveway entrance access. It is designed to allow a vehicle user full manoeuvrability around a property. A Bi-Folding Gate will be less expensive to automate than a double swing gate since it requires only one gate operator instead of two. It is a perfect solution for the entrance with a gravel surface, considering that you do not need to lay down the rails. There‘s no doubt that Bi-Folding Gates is a money and space-saving alternative that is convenient and can be very stylish.

Extremely Quiet

In the past, Swing Bi-Folding gates were originally very noisy. Older versions use steel rails and wheels, which can be very noisy compared to New CAIS TWIN DRIVE Trackless Bi-Folding System.

Reliable

The CAIS TWIN DRIVE Trackless Bi-Folding System is reliable in any weather condition, even if the wind blows heavily.

Bi-Folding Swing Gate System's Special Needs

They need a special frame, so a few factors need to be considered, such as cross-bracing. The reason why cross-bracing is fundamental is primarily to keep the leaf from sagging.  A compression cross-brace transfers weight from the top bar by pushing down against the bottom hinge or a vertical component or post, which transfers the load to both hinges. Improper or missing cross-bracing will cause the Vertical deflection of the leaf.  Cross-bracing should always “lean into opening”. Furthermore, the bi-folding swing gate only works properly when the internal hinges are properly welded concerning the vertical axle. You‘ll also need to consider the wiring of safety edges, as this feature should be accommodated in the frame.

Italian Made Double Swing Gate Opener | Linear Actuator for Automatic Driveway Gates

Italian Made Double Swing Gate Actuator Overview

Italian Made Swing Gate Automation Installation Geometry

APC-ABLE EVO2 24V Universal Digital Control Board for Swing Gates

APC-ABLE EVO2 24V Swing Gate Motor Digital Control Board | APC.able Gate Automation Systems

Upgrade or install your automatic gate opener Australia-wide with the APC-ABLE EVO2 24V Digital control panel. Precise obstacle detection and smart digital programming. 

Take total command of your property's access with the APC-ABLE EVO2 (built on the advanced ABLE V2 CX EVO2 24V platform). Engineered as a highly sophisticated, multi-brand-compatible swing gate motor control board, this digital control unit is the ultimate solution for both brand-new installations and drop-in replacements for aging gate systems.
(Please call our specialist if you are buying for your existing system to ensure compatibility.)

Operating on a reliable 24V architecture, the APC-ABLE EVO2 delivers ultra-smooth acceleration and deceleration, along with high-sensitivity obstacle detection, to protect your family, vehicles, and pets. Whether you are running a residential driveway setup or a light commercial entrance, this robust system brings intelligent digital management to your automatic swing gate automation.

Key Features

• Universal Multi-Brand Compatibility: Designed to seamlessly replace or upgrade existing 24V swing gate control setups across a wide array of major international and local brands. (Please call our specialist if you are buying for your existing system to ensure compatibility.)

• Advanced Obstacle Sensing: Smart current monitoring provides precise obstacle detection and instantly reverses the gates if a car, person, or pet blocks the path.

• Digital Programming Display: An onboard digital screen simplifies setup, allowing installers or DIYers to quickly program logic paths, delay times, and remote pairings.

• Adaptive Dual-Leaf Management: Complete control over dual-gate leaves, featuring customisable pedestrian-opening modes (single-gate operation) and leaf-delay sequencing.

• Weatherproof Enclosure Included: Arrives pre-housed in a heavy-duty, UV-stabilised outdoor enclosure designed to withstand harsh Australian weather conditions.

• Expandable Accessory Terminal: Features plug-and-play slots for plug-in radio receivers, rolling-code remotes, safety photocell pairs, loop detectors, and external keypads.

Key Benefits for Australian Properties

• Smarter, Safer Gate Operation: Traditional 230V systems can be harsh. The 24V architecture of this electric gate motor control system allows for smooth slow-downs at the end of both opening and closing cycles, reducing wear and tear on your gate hinges and posts.

• Save on Full Replacement Costs: If your existing swing gate operator motors are still in perfect working order but the original circuit board has failed, you don’t need to buy a whole new kit. The APC-ABLE EVO2 wires directly into your current setup, saving you thousands in hardware and labour. (Please call our specialist if you are buying for your existing system to ensure compatibility.)

• Tailored to Australian Conditions: From scorching summer heat to heavy coastal rains, the included heavy-duty enclosure protects the digital core of your system, ensuring your swing gate opener performs reliably day in and day out.

Technical Data Specifications

Frequently Asked Questions (FAQs)

Will the APC-ABLE EVO2 work with my existing swing gate operator?

Yes. The APC-ABLE EVO2 is engineered as a universal 24V swing-gate motor control board. Provided your existing gate motors run on a 24V DC configuration, this board can be wired to control them, making it one of the most flexible options for gate repairs and upgrades across Australia. (Please call our specialist if you are buying for your existing system to ensure compatibility.)

What makes a 24V electric gate motor control system better than a 230V system?

A 24V system offers significant advantages in safety and refinement. It allows the control board to continuously monitor electrical current to detect blockages (obstacle detection) and enables "soft-start" and "soft-stop" handling, which prevents the gates from slamming violently. Additionally, low-voltage wiring is safer and more flexible for residential properties.

Does this control panel come ready for outdoor installation?

Absolutely. The APC-ABLE EVO2 comes complete with its own dedicated, heavy-duty weatherproof housing. It is fully rated for outdoor environments and designed to shield the delicate internal digital circuitry from rain, dust, pests, and UV exposure.

Can I connect accessories like solar power backups, safety sensors, or wireless keypads?

Yes, the board features an expansive, clearly labelled terminal strip. It natively supports standard safety photocells (infrared beams), external receivers, wireless or wired keypads, and automatic vehicle loop detectors to customise your automatic gate opener Australia-wide.

APC-PE2000 Photoelectric Safety Sensor Set

The Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.

If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position.

Both sensors (transmitter and receiver) are wired back to the control box of the gate system using the supplied cable roll, alternatively a reflective sensor upgrade is available which will only require wiring from the sensor mounted at the control box.
 

• Up to 15 Metres Infared beam operating distance


• Only powers on when the command is given to close the gates


• Alignment led to assist in the installation process


• Weather sealed with the supplied cover seals


• Easy screw down wiring termination