APC V2 NUUR 4 Automatic Boom Gate Parking Barrier Kit – Automatic Number Plate Recognition (ANPR) Entry & Wireless e-Loop Auto Exit, Ultra Fast 24V DC Universal Boom Gate with 4m Boom Arm, Italian-Made Car Park Access Control System with Safety Sensors, Remote Controls, Hikvision 4MP DeepinView Multi-Sensor Bullet Camera and e-Loop Light Industrial Wireless Vehicle Detection (Version 4) with Exit & Presence Modes (Australian Version, AU Stock)

Understanding How Automatic Number Plate Recognition (ANPR) Integration Works

• The ANPR (Automatic Number Plate Recognition) camera needs to be connected to your network using a PoE (Power over Ethernet) connection. This allows the camera to receive both power and data through a single network cable.
• The camera comes with free management software, which is used to create and manage a whitelist of vehicle registration numbers. Any vehicle with a number plate entered into the approved list will be automatically recognised by the camera.
• When an approved vehicle is detected, the camera sends an output signal via a dry contact relay. This relay output can be connected directly to the boom gate controller, triggering the boom gate to open automatically without the need for a remote control, access card, or keypad.
• This provides a convenient and secure access control solution for sites such as car parks, residential complexes, commercial premises, and gated facilities.

Have questions about integrating ANPR with your setup? Contact our support team via phone or email for expert guidance. 

Automatic Number Plate Recognition (ANPR) Integration

How the System Works

1. Vehicle Approach & Detection: As a vehicle approaches, the ANPR camera captures and reads the vehicle registration number in real time.
2. Whitelist Verification: The camera checks the license plate against an approved whitelist managed through the included free management software.
3. Automated Barrier Trigger: When a match is verified, the camera triggers a dry contact relay directly wired to the boom gate controller, instantly opening the barrier.

Key Features & Installation Details

Single-Cable PoE Setup: The ANPR camera connects via Power over Ethernet (PoE), delivering both power and data through a single network cable for clean, simplified wiring.

Hands-Free Access: Eliminates the need for physical remotes, access cards, or keypads for authorised users.

Included Management Software: Easily add, edit, or remove authorized number plates from a central interface at no extra cost.

Ideal Applications

Perfect for securing high-traffic or controlled access locations, including:

• Residential & Gated Communities
• Commercial Car Parks & Office Complexes
• Industrial Sites & Logistics Hubs

If you have any further questions, please contact us by email or phone.

APC V2 NUUR4 ULTRA FAST 24V Boom Barrier / Boom Gate / Parking Barrier, Car Parking Access Control 

Ultra-low power consumption. Suitable for solar-powered systems.

24V Ultra Fast-Opening Automatic Raise Arm Barrier/Boom Gate

24V rapid opening automatic raise arm barrier for residential and multiple-use installations up to 4m width

Boom Barrier / Boom Gate / Parking Barrier, Car Parking Access Control APC V2 NUUR4, Universal Boom Gate Ultra High-Speed 24V DC, 4 Meter Barrier Made in Italy

• Accurate and safe operation with encoder
• Obstacle detection
• Self-learning of opening and closing times
• Slow-down in the limit switch area
• Balancing spring included
• White painted aluminium bar (accessory)
• Digital control unit programmable using three program buttons and display
• Plug-in adaptor for modular receiver
• ADI connector for APC Infinity WiFi module that allows control of the barrier with the Mobile APP
• Input for photocells with self-test function
• Input for mechanical safety edges
• Courtesy light output
• Holding magnet output
• Energy Saving function to minimise consumption in standby mode
• Programmable acceleration and deceleration
• Operation in case of absence of power using the backup battery
• Operation with solar power using the ECO-LOGIC system

Motor Overview / Balancing Spring System

Technical Features

• Power supply (Vac - Hz): 230 V~ 50 Hz
• Motor power supply (Vac - Hz):  24 Vdc
• Maximum electric power (W): 300W
• Opening time (s): 3 Seconds for 4 Meter Boom Arm
• Working temperature (°C): Between -20° to +55°
• Duty cycle % - (max. cycles/hour): 80% - (300)

Control Panel

• Digital control unit programmable using three program buttons and display
• Plug-in adaptor for receiver 
• ADI connector for APC Infinity WiFi module that allows control of the barrier with the Mobile APP

Dimensions

Universal Boom Gate (Pre-Configured Right Hand Side) Ultra High-Speed 24V DC, 4 Meter Barrier Made in Italy

APC V2 NUUR Universal Boom Gate Operator – High-Speed Italian Access Control

APC V2 NUUR 24V Universal Boom Gate Operator | Italian Made | AutoMotion Plus

Control vehicle access with the APC V2 NUUR. Italian-made, 24V ultra-fast boom gate (4m/6m). Features obstacle detection, solar readiness & smartphone control.

The Ultimate Solution for Secure Vehicle Access in Australia

The APC V2 NUUR Universal Boom Gate Operator represents the pinnacle of Italian engineering, designed specifically to meet the rigorous demands of Australian commercial and residential access control. Whether managing a busy corporate car park in City Centre (Sydney, Melbourne, Brisbane, Perth, Adelaide, Canberra, Hobart, etc.) or a remote solar-powered industrial site in Western Australia, or a farm across all of AU, the V2 NUUR delivers unmatched speed, reliability, and intelligence.

Available in 4-meter (NUUR4) and 6-meter (NUUR6) configurations, this 24V DC operator is built for high-duty cycles (80%), ensuring continuous operation during peak traffic hours. Its universal design allows for easy left or right-hand installation, making it the most versatile barrier on the market.

Equipped with advanced digital control, the V2 NUUR offers smooth acceleration, precise deceleration, and integrated obstacle detection for maximum safety. With the APC Infinity Wi-Fi module (optional), users can unlock smart features such as geolocation-based opening and scheduled access directly from their smartphones, modernising how Australia manages vehicle flow.

Key Features

• Italian Reliability: 100% manufactured in Italy, ensuring superior build quality and longevity.

• Ultra-High Speed: Opens in as fast as 3 seconds (4m model) or 5 seconds (6m model) for rapid traffic flow.

• Universal Configuration: innovative design allows the arm to be installed on either the Left or Right side effortlessly.

• 24V DC Motor: High-efficiency low-voltage motor supports 80% duty cycle (up to 300 cycles/hour).

• Solar Ready: Fully compatible with the ECO-LOGIC solar system, perfect for remote Australian locations without mains power.

• Smart Safety: Built-in encoder provides obstacle detection, self-learning opening times, and soft-stop technology.

• Smartphone Control: Compatible with APC Infinity Wi-Fi for App-based control, Geo-fencing, and user management.

• Power Failure Proof: Optional battery backup ensures the gate operates even during blackouts.

Quick Reference Product Table

Technical Data Sheet

FAQ (APC V2 NUUR Universal Boom Gate Operator)

Q: What is the best boom barrier gate for high-traffic car parks in Australia?

A: The APC V2 NUUR is a top contender due to its 80% duty cycle and fast opening speeds (3-5 seconds). It is designed to handle the frequent entry and exit requirements of Australian commercial buildings and shopping centres without overheating.

Q: Can I install a boom gate in a location without mains power?

A: Yes. The APC V2 NUUR 24V system is compatible with the ECO-LOGIC solar power system. This makes it the best boom gate solution for remote industrial sites, farm entrances, or mining camps in Australia, where running cables is too expensive.

Q: How does the "Universal" feature work on this boom gate?

A: Unlike many competitors that require you to buy a specific "Left" or "Right" hand unit, the APC V2 NUUR is universal. You can swap the arm installation side on-site, providing flexibility if site conditions change.

Q: Is this boom gate compatible with smartphone opening?

A: Absolutely. By adding the APC Able Infinity Wi-Fi Module, you can use the Able to Use App to open/close the gate via Smart App, and you can even use Geo-Location (opening automatically as you approach), creating a seamless and secure access experience. You can download the free mobile application for Android and IOS devices from the official stores (Google Play, Apple App Store)

Q: What safety features are required for boom gates in Australia?

A: Australian safety standards rely on minimising risk. The V2 NUUR features encoder-based obstacle detection (reversing if it hits a car/person) and supports external safety devices, such as Retro Reflective Safety Sensors and Loop Detectors, to prevent the arm from closing on vehicles.

APC Automation Systems FOUR Button Keyring Remote Control

Four-button remote control transmitter used for operating the boom gate system for OPEN - STOP - CLOSE commands. The remote can be paired to other APC boom gates on the same site or diffrent sites using any of the vacant or unused buttons.  

Hikvision IDS-2CD8A46G2-XZHSY – AutomotionPlus Edition

Premium AI-Powered Security for Australian Homes, Farms & Commercial Sites

The Hikvision IDS-2CD8A46G2-XZHSY is a high-performance 4MP DeepinView AI Network Camera engineered for harsh Australian conditions. As part of AutomotionPlus’ professional security lineup, this camera delivers industry-leading analytics, long-range optical zoom, and exceptional low-light clarity — making it ideal for residential gates, rural properties, warehouses, workshops, commercial facilities, and critical infrastructure.

Designed for installers, business owners, and farmers who demand reliability, the DeepinView series uses Hikvision’s advanced Acusense Deep Learning to minimise false alarms and provide accurate detection of:

• Humans (Capture vehicles and humans of different speeds clearly)

• Vehicles (License plate recognition and vehicle attribution recognition)

• Unwanted events such as intrusion, line-crossing, loitering, and region entrance/exit

Whether you're monitoring a long driveway, a machinery shed, a warehouse aisle, or a property boundary, this camera delivers crystal-clear detail, powerful zoom, and AI accuracy you can trust.

4MP DeepinView Multi-Sensor Bullet Camera

Key Features

Built for Australian Installations

• 4MP High-Resolution Imaging – Sharp, detailed video day and night.

• 32× Optical Zoom (varies by sub-model) – Perfect for long-distance viewing.

• Smart IR up to 200m – Clear night vision in complete darkness.

• IP67 & IK10 Rating – Weatherproof and vandal-resistant.

• -30°C to +60°C Temperature Range – Performs reliably across Australia’s climate.

Advanced AI + Security Intelligence

• Human & Vehicle Classification – Reduces false alarms from animals, trees, and weather.

• Deep Learning Video Analytics, including:

  • Intrusion Detection

  • License plate recognition and vehicle attribution recognition

  • Line Crossing

  • Region Entrance / Exit

  • Face Detection

  • People Counting (depending on model)

• Audio & Alarm I/O – Supports integrated security automation.

Connectivity & Integration

• H.265+ Encoding – Saves up to 80% storage and bandwidth.

• PoE Support – Easy installation with a single cable.

• ONVIF Compatible – Works with third-party NVRs.

• Secure HTTPS, 802.1X & Cybersecurity Controls – Protects your network.

• Event - intrusion, line-crossing, loitering, and region entrance/exit
  • Basic Event: Motion detection, video tampering alarm, exception (network disconnected, IP address conflict, illegal login, HDD full, HDD error), video quality diagnosis, vibration detection
  • Smart Event: Unattended baggage detection, object removal detection, scene change detection, audio exception detection, defocus detection
  • Linkage: Upload to FTP/NAS/memory card, notify surveillance centre, send email, trigger alarm output, trigger recording, trigger capture

Specification Table

Summary

If you need serious AI-driven CCTV performance over long distances, in challenging environments, or at critical monitoring points, the Hikvision IDS-2CD8A46G2-XZHS(Y) is a top-tier choice. With deep-learning accuracy, exceptional optical zoom, and rugged outdoor build, it’s a perfect match for Australian homes, farms, and commercial installations.

e-Loop Light Industrial Wireless Vehicle Detector — Exit & Presence Mode (Version 4)

Model: EL00LI | Category: Wireless Vehicle Detection | Available in Australia

Key Features of the e-Loop Light Industrial Wireless Vehicle Detector

• Three Operational Modes: Supports Exit Mode (single trigger pulse on vehicle detection), Presence Mode (latches relay whilst vehicle is present, keeping gates open), and Parking Mode (slower latch/release with reduced power draw) — selectable by magnet or via the e-Loop Connect app.
• Completely Wireless & Battery-Powered: No ground cutting, no trenching, no cabling required. Powered by 4 × 3.6V 2700mAh batteries, enabling quick installation with zero surface disruption.
• IP68 Ingress Protection: Fully sealed against dust and water ingress for reliable outdoor performance in all Australian weather conditions, including heavy rain and flooding risk environments.
• Dual-Technology Detection (Radar + Magnetometer): Combines radar sensing (up to 2 m range, 60° field of view) with a tiered magnetometer for highly accurate, false-trigger-resistant vehicle detection.
• 128-Bit AES Encryption: All wireless signals between the sensor and receiver are encrypted with 128-bit AES, ensuring tamper-resistant, secure data transmission.
• Set-and-Forget Auto-Calibration: The e-Loop continuously self-calibrates to adapt to environmental changes. After mounting, it will automatically calibrate within 5 minutes, or it can be manually calibrated using the included magnet.
• 433.39 MHz FSK Wireless Communication: Operates on the 433 MHz band with FSK modulation, providing stable, long-range signal transmission compatible with the full e-Trans receiver range.
• e-Loop Connect App Compatible: Access advanced diagnostics, mode changes, confirmation mode settings and radar range adjustments via the free e-Loop Connect mobile app for Android and iPhone.
• Extreme Temperature Tolerance: Operates reliably across −40°C to +80°C, suitable for Australian environments from tropical Queensland to cold southern regions.
• Rapid, Low-Disruption Installation: Above-ground mounting with included fasteners to a clean, flat, level surface — no specialist tools or contractors required.
• EN 301 489-1 V2.2.3 & EN 55032 Compliant: Manufactured and tested to international EMC radio compliance standards.
• Confirmation Mode: Optional confirmation mode reduces false triggers, providing additional confidence in gate automation applications.

Full Product Description — e-Loop Light Industrial Wireless Vehicle Detector

Purpose-Built for Australian Light Industrial Environments

Exit Mode, Presence Mode & Parking Mode Explained

One of the defining characteristics of the e-Loop Light Industrial is its support for three distinct operational modes, each tailored to a different vehicle management scenario:

Exit Mode delivers a single momentary trigger pulse to the paired e-Trans receiver when a vehicle enters the detection zone. This is the standard configuration for driveway exit sensors and vehicle exit detectors — signalling a gate or barrier to open as a vehicle approaches to leave a site. The gate then closes on its normal timer or safety edge signal. Exit Mode is the most common configuration for automated gate systems at industrial sites, warehouses, and logistics centres across Australia.

Presence Mode sends a continuous pulse and latches the relay output, holding the gate or barrier open for the entire duration that a vehicle is detected within the sensor's zone. When the vehicle clears the area, the relay releases, allowing the gate to close. This mode is ideal for loading dock management, where vehicles must be stationary for extended periods during loading and unloading, and the gate or door must remain securely open throughout. It is important to note that Presence Mode is designed for vehicle detection only and should not be used as a personal safety device for pedestrian protection.

Parking Mode operates on the same principle as Presence Mode — latching the relay when a vehicle is detected — but features slower latch and release speeds, making it better suited to lower-traffic parking and storage areas. It also consumes less power, extending battery life in applications with longer dwell times.

Modes can be changed at any time using the included magnet on the sensor's magnetic recesses or remotely using the e-Loop Connect mobile app, available free for both Android and iPhone devices. The app also enables access to advanced diagnostics, radar range adjustment, and confirmation mode — providing complete remote management without the need to physically access the sensor.

Wireless Technology & Secure Transmission

The e-Loop Light Industrial transmits over the 433.39 MHz FSK frequency band with a nominal output power of 14 dBm. All transmissions are encrypted with 128-bit AES encryption, preventing signal interception, cloning, or replay attacks — a critical feature for security-sensitive industrial sites. The system is compatible with the full range of e-Loop e-Trans receivers (e-Trans 20, 50, 100 and 200), which provide standard relay outputs for integration with existing gate controllers, access control systems and barrier operators commonly used across Australian commercial and industrial facilities.

Pairing with an e-Trans receiver can be performed in two ways: short-range coding by holding the magnet on the e-Loop's code recess while pressing the code button on the nearby e-Trans unit, or long-range coding for situations where the transmitter and receiver are already deployed at a distance.

Intelligent Auto-Calibration

The e-Loop Light Industrial features adaptive auto-calibration that continuously monitors and adjusts to the electromagnetic environment surrounding the sensor. This eliminates false triggers caused by changes in ground composition, nearby metalwork, or environmental drift, which commonly affect fixed inductive loops. After installation on a clean, flat, level surface, the sensor will automatically calibrate within approximately 5 minutes. If the sensor is relocated, a manual recalibration procedure is required using the included magnet — a simple three-step process that takes only seconds.

Optimal Mounting for Maximum Detection Performance

To achieve consistent and reliable detection, the e-Loop Light Industrial should be mounted centrally on the most frequently driven path, with the directional arrow facing toward the gate. The mounting surface must be clean, flat, and level — uneven terrain, debris, or rocks can compromise calibration accuracy and risk physical damage to the housing. The unit should not be mounted in areas prone to flooding without adequate drainage, near high-voltage cables, or in proximity to strong electromagnetic interference sources. The sensor must be firmly secured with the provided fasteners and must not move once installed.

Benefits of the e-Loop Light Industrial for Australian Businesses

Eliminate Costly Ground Works

Traditional inductive loop detectors require saw-cutting the road surface, embedding loop wire, filling and sealing the cut, and running conduit to a control panel. The e-Loop Light Industrial requires none of this — delivering significant cost savings on installation, particularly relevant for existing facilities in Australia where resurfacing work is expensive and disruptive.

Zero Operational Downtime During Installation

Because the e-Loop mounts above ground and requires no electrical connection to the site's power infrastructure, installation can typically be completed in under an hour without closing the facility or disrupting vehicle flow. This is particularly valuable for high-throughput logistics centres, warehouses and factories that operate around the clock.

Flexible Mode Selection for Multiple Use Cases

A single product model supports Exit, Presence and Parking modes — meaning one SKU can address multiple detection scenarios across your site. Modes can be changed remotely via the app, avoiding the need to replace hardware as operational requirements evolve.

Secure, Encrypted Signal Transmission

128-bit AES encryption on all wireless communications ensures that the vehicle detection system cannot be compromised by signal interception or spoofing — providing confidence for security-conscious industrial and commercial facilities.

Reduced Maintenance Burden

Set-and-forget auto-calibration means the sensor continually adapts to its environment without operator intervention, reducing the maintenance overhead associated with traditional inductive loop systems which are prone to detuning, wire breaks, and false triggers over time.

App-Based Remote Diagnostics

The e-Loop Connect app gives operators visibility of battery level, signal strength, current mode, and diagnostic data — enabling proactive maintenance and rapid fault identification without dispatching a technician to site.

Rugged Design for Australian Conditions

IP68 ingress protection and a −40°C to +80°C temperature range ensure the sensor performs in Australia's extreme and varied climate, from tropical humidity in Darwin and Cairns to summer heat in Western Australia and winter frosts in Victoria and Tasmania.

Technical Specifications — e-Loop Light Industrial (EL00LI)

Full Technical Datasheet: e-Loop Light Industrial Wireless Vehicle Detector (Model EL00LI)

Operational Modes

Compliance

App & Connectivity

Compatible Receivers

Common Applications for the e-Loop Light Industrial in Australia

• Industrial Driveway Exit Detection: Triggers automatic gates and barriers to open as vehicles approach to exit an industrial site, warehouse, or logistics facility.
• Loading Bay Presence Detection: Holds roller doors and dock levellers open while trucks are present at the loading dock, preventing premature closure during loading and unloading operations.
• Factory Perimeter Gate Automation: Provides vehicle-triggered gate automation at factory access points, eliminating the need for manual gate operation or surface-mounted loop wire.
• Service Yard Entry and Exit Management: Monitors vehicle arrivals and departures at service yards, fuel depots, and maintenance facilities.
• Logistics Centre Vehicle Flow Control: Manages traffic flow through multi-gate logistics facilities with individual zone control via separate e-Trans receivers.
• Warehousing Facility Gate Triggers: Automates internal and perimeter gate operation in multi-tenant warehousing estates.
• Mining Site Access Control: Rugged construction and extreme-temperature tolerance suit remote Australian mining-site environments.
• Agricultural & Rural Property Gates: A battery-powered, wireless design is ideal for remote rural properties in Australia without mains power at the gate.
• Car Park Exit Lane Detection: Detects vehicles at pay station exit lanes or boom gate approaches in commercial car parks.
• Retrofit of Existing Inductive Loop Systems: Directly replaces failed or outdated saw-cut inductive loop detectors without requiring road surface works.

Installation Overview — How to Set Up the e-Loop Light Industrial

The e-Loop Light Industrial is designed for quick, straightforward above-ground installation. The following is a summary of the setup process. For complete step-by-step instructions, refer to the Instruction Manual.

1. Step 1 — Coding / Pairing with e-Trans Receiver: Use either short-range coding (hold magnet on CODE recess of e-Loop while pressing the CODE button on the e-Trans receiver until LEDs confirm pairing) or long-range coding (hold magnet until Yellow LED flashes, then activate the e-Trans CODE button) to wirelessly pair the sensor with its receiver.
2. Step 2 — Mounting: Clean the desired mounting location of all dirt and debris. Mount the e-Loop on a clean, flat, level surface in the centre of the most frequently driven path. Ensure the directional arrow faces toward the gate. Secure firmly using the included fasteners. Reinstall dust caps on all screw holes. Do not mount near high-voltage cables, on uneven terrain, in flood-prone areas without drainage, or on irregular or sharp ground surfaces.
3. Step 3 — Calibration: Remove all metallic objects from the vicinity. Hold the magnet in the SET recess until the Red LED flashes twice, then remove the magnet. The e-Loop will calibrate within approximately 5 seconds, confirmed by 3 Red LED flashes. If the sensor is moved after calibration, it must be recalibrated. Alternatively, the unit will self-calibrate automatically within 5 minutes if left undisturbed.
4. Step 4 — Mode Selection (Optional): The default mode is Presence Mode. To change to Exit or Parking Mode, use the included magnet on the appropriate magnetic recess or use the e-Loop Connect app. Refer to the instruction manual for the LED confirmation sequences for each mode.

Important Installation Warnings: Always install in accordance with the fitment notes in the instruction manual. Failure to do so may void the product warranty. The e-Loop Light Industrial should not be used in Presence Mode as a personal safety device — it is designed exclusively for vehicle detection.

Frequently Asked Questions — Wireless Vehicle Detector (Australia)

What is a wireless vehicle detector, and how does it work?

A wireless vehicle detector is a sensor that identifies the presence or movement of a vehicle and transmits a trigger signal wirelessly — without physical wiring — to a receiver or gate controller. The e-Loop Light Industrial uses a combination of radar sensing and magnetometer technology. When a vehicle enters the detection zone, the sensor detects the vehicle's mass and metallic signature, encrypts the trigger signal using 128-bit AES, and transmits wirelessly to the paired e-Trans receiver at 433.39 MHz FSK, which then activates the relay output to open a gate, barrier, or trigger an alert.

What is the difference between Exit Mode and Presence Mode on the e-Loop Light Industrial?

Exit Mode sends a single momentary pulse to the receiver when a vehicle is detected — ideal for triggering a gate to open as a vehicle approaches to exit a site. Presence Mode sends a continuous pulse and latches the relay, holding the gate open for as long as the vehicle remains within the detection zone — suited to loading docks and areas where the gate must stay open during vehicle dwell time. Parking Mode is similar to Presence Mode, with a slower latch/release and lower power consumption, making it better suited to parking and storage applications.

Does the e-Loop Light Industrial require any wiring or ground cutting to install?

No. The e-Loop Light Industrial is completely wireless and battery-powered, requiring no ground cutting, no trenching, and no electrical wiring. It mounts above ground using the included fasteners and communicates wirelessly with compatible e-Trans receivers. This makes it ideal for retrofitting existing driveways, loading docks or factory gates without disrupting the surface or operational flow.

Is the e-Loop Light Industrial suitable for outdoor use in Australian conditions?

Yes. The EL00LI carries an IP68 ingress protection rating — fully sealed against dust and continuous water immersion — and operates across an extreme temperature range of −40°C to +80°C. This makes it well-suited to Australia's varied climate conditions across all states and territories, including tropical, arid, alpine and temperate zones.

What is the wireless detection range of the e-Loop Light Industrial?

The radar detection system provides a 60° field of view with a default read distance of 1.8 m, a maximum range of 2.0 m, and a minimum read distance of 0.2 m. The magnetometer provides tiered detection sensitivity at 0.5 m, 1.0 m and 1.5 m ranges. Wireless radio transmission range between the sensor and the paired e-Trans receiver depends on site conditions and the selected e-Trans model.

How long do the batteries last in the e-Loop Light Industrial?

Battery life is influenced by daily activation frequency, activation duration, radar range setting, and environmental conditions. The unit is powered by 4 × 3.6V, 2700 mAh batteries with an extremely low standby draw of just 14 µA. At 50 activations per day, battery life is substantially longer than at higher activation frequencies, such as 300+ per day. The e-Loop Connect app provides real-time battery status diagnostics.

Can I change the operating mode after installation without removing the sensor?

Yes. Mode changes are made in two ways: physically using the included magnet on the sensor's magnetic recesses (no tools required), or remotely via the free e-Loop Connect mobile app for Android and iPhone. The app also enables radar range adjustment, confirmation mode configuration, and access to diagnostics — all without physically interacting with the sensor.

Does the e-Loop require recalibration if moved to a different location?

Yes. Once calibrated, the e-Loop requires recalibration whenever it is physically moved to a new location. Recalibration is performed using the included magnet on the SET recess in a simple three-step process. If the sensor is not moved, it will automatically self-calibrate within approximately 5 minutes of being powered on.

Is the e-Loop Light Industrial compatible with existing gate automation systems in Australia?

The e-Loop Light Industrial pairs with e-Loop's e-Trans receiver range (e-Trans 20, 50, 100 and 200), which provides standard relay outputs for integration with most gate automation controllers, barrier systems, and access control panels commonly used across Australian commercial and industrial sites. Always confirm relay output compatibility with your specific gate controller or automation brand before purchasing.

What applications is the e-Loop Light Industrial suited to in Australia?

The EL00LI is suited to a broad range of Australian applications including: driveway exit detection for industrial estates, loading bay presence monitoring, factory perimeter gate automation, service yard entry and exit control, logistics centre vehicle flow management, warehousing gate triggers, mining site access control, rural property gate automation, car park exit detection, and retrofit replacement of failed inductive loop detectors.

What is the model number of the e-Loop Light Industrial, and where can I find the instruction manual?

The model number is EL00LI. The full instruction manual is available for download in PDF format from Installation Manuals

Is the e-Loop Light Industrial compliant with Australian standards?

The e-Loop Light Industrial is tested and certified to EN 301 489-1 V2.2.3 (ElectroMagnetic Compatibility standard for radio equipment) and EN 55032 (Electromagnetic compatibility of multimedia equipment emissions).

Can the e-Loop Light Industrial be used as a pedestrian or personal safety device?

No. The e-Loop Light Industrial is designed exclusively for vehicle detection. It must not be used as a personal safety device for pedestrian protection. Presence Mode in particular — which holds a gate open while detecting mass — is not a substitute for safety edges, photocells or other certified personal safety devices required by Australian Standards for automated gate systems.

APC-RR-11 Retro Reflective Sensor

The retro-reflective Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.

If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position.

The sensor ( which is the transmitter and receiver) is wired back to the control box of the gate system using the pre-connected cable. There is no requirement for wiring across the driveway using this type of sensor.
 

• Up to 11 Metres Infrared beam operating distance


• Only powers on when the command is given to close the gates


• Alignment & Misalignment led to assist in the installation process


• Resin filled for the ultimate weatherproofing