Double Swing Gate Opener Super Secure Kit - Italian-Made APC-ABLE-3000x2 Heavy Duty Linear Actuator. Double Swing Gate Automation System With High-Strength Magnetic Lock For Securing Large & Tall Gates From Heavy Wind Load, Wi-Fi Keypad With APP Control, Exit Button & Safety Sensors For Double Driveway Gates Automatic Opening/Closing 24V System for Max 6m Gates (3m or 600kg for Each Gate) With Adjustable Built-In Stop.

Italian Made Double Swing Gate Opener | Linear Actuator for Automatic Driveway Gates

Italian Made Double Swing Gate Actuator Overview

Italian Made Swing Gate Automation Installation Geometry

APC-ABLE EVO2 24V Universal Digital Control Board for Swing Gates

APC-ABLE EVO2 24V Swing Gate Motor Digital Control Board | APC.able Gate Automation Systems

Upgrade or install your automatic gate opener Australia-wide with the APC-ABLE EVO2 24V Digital control panel. Precise obstacle detection and smart digital programming. 

Take total command of your property's access with the APC-ABLE EVO2 (built on the advanced ABLE V2 CX EVO2 24V platform). Engineered as a highly sophisticated, multi-brand-compatible swing gate motor control board, this digital control unit is the ultimate solution for both brand-new installations and drop-in replacements for aging gate systems.
(Please call our specialist if you are buying for your existing system to ensure compatibility.)

Operating on a reliable 24V architecture, the APC-ABLE EVO2 delivers ultra-smooth acceleration and deceleration, along with high-sensitivity obstacle detection, to protect your family, vehicles, and pets. Whether you are running a residential driveway setup or a light commercial entrance, this robust system brings intelligent digital management to your automatic swing gate automation.

Key Features

• Universal Multi-Brand Compatibility: Designed to seamlessly replace or upgrade existing 24V swing gate control setups across a wide array of major international and local brands. (Please call our specialist if you are buying for your existing system to ensure compatibility.)

• Advanced Obstacle Sensing: Smart current monitoring provides precise obstacle detection and instantly reverses the gates if a car, person, or pet blocks the path.

• Digital Programming Display: An onboard digital screen simplifies setup, allowing installers or DIYers to quickly program logic paths, delay times, and remote pairings.

• Adaptive Dual-Leaf Management: Complete control over dual-gate leaves, featuring customisable pedestrian-opening modes (single-gate operation) and leaf-delay sequencing.

• Weatherproof Enclosure Included: Arrives pre-housed in a heavy-duty, UV-stabilised outdoor enclosure designed to withstand harsh Australian weather conditions.

• Expandable Accessory Terminal: Features plug-and-play slots for plug-in radio receivers, rolling-code remotes, safety photocell pairs, loop detectors, and external keypads.

Key Benefits for Australian Properties

• Smarter, Safer Gate Operation: Traditional 230V systems can be harsh. The 24V architecture of this electric gate motor control system allows for smooth slow-downs at the end of both opening and closing cycles, reducing wear and tear on your gate hinges and posts.

• Save on Full Replacement Costs: If your existing swing gate operator motors are still in perfect working order but the original circuit board has failed, you don’t need to buy a whole new kit. The APC-ABLE EVO2 wires directly into your current setup, saving you thousands in hardware and labour. (Please call our specialist if you are buying for your existing system to ensure compatibility.)

• Tailored to Australian Conditions: From scorching summer heat to heavy coastal rains, the included heavy-duty enclosure protects the digital core of your system, ensuring your swing gate opener performs reliably day in and day out.

Technical Data Specifications

Frequently Asked Questions (FAQs)

Will the APC-ABLE EVO2 work with my existing swing gate operator?

Yes. The APC-ABLE EVO2 is engineered as a universal 24V swing-gate motor control board. Provided your existing gate motors run on a 24V DC configuration, this board can be wired to control them, making it one of the most flexible options for gate repairs and upgrades across Australia. (Please call our specialist if you are buying for your existing system to ensure compatibility.)

What makes a 24V electric gate motor control system better than a 230V system?

A 24V system offers significant advantages in safety and refinement. It allows the control board to continuously monitor electrical current to detect blockages (obstacle detection) and enables "soft-start" and "soft-stop" handling, which prevents the gates from slamming violently. Additionally, low-voltage wiring is safer and more flexible for residential properties.

Does this control panel come ready for outdoor installation?

Absolutely. The APC-ABLE EVO2 comes complete with its own dedicated, heavy-duty weatherproof housing. It is fully rated for outdoor environments and designed to shield the delicate internal digital circuitry from rain, dust, pests, and UV exposure.

Can I connect accessories like solar power backups, safety sensors, or wireless keypads?

Yes, the board features an expansive, clearly labelled terminal strip. It natively supports standard safety photocells (infrared beams), external receivers, wireless or wired keypads, and automatic vehicle loop detectors to customise your automatic gate opener Australia-wide.

APC Automation Systems FOUR Button Keyring Remote Control

 

• Featuring High-Security rolling codes transmitting a unique code chosen at random
• Slim design
• Keyring Clip-on System
• Compatible with APC RX2 Two Channel Receiver
• Completely Backwards Compatible with all legacy APC control boards

 

APC and APC-able Automation Systems FOUR Button Remote Control with Sun Visor Clip

Four-button remote control transmitter used for:

• APC and APC-able Swing Gate Systems
• APC and APC-able Sliding Gate Systems
• APC and APC-able Boom Gate Operating Systems
• APC and APC-able Receivers

 

Features

 

• Featuring high-security rolling codes transmitting a unique code chosen at random
• Slim design
• Sun visor clip for easy car access
• Completely backwards-compatible with all legacy APC and APC-able control boards

Installed on your Sun Visor

WARNING: Please note this product is for use with the APC and APC-able gate automation systems and will not work with other brands.

APC-PE2000 Photoelectric Safety Sensor Set

The Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.

If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position.

Both sensors (transmitter and receiver) are wired back to the control box of the gate system using the supplied cable roll, alternatively a reflective sensor upgrade is available which will only require wiring from the sensor mounted at the control box.
 

• Up to 15 Metres Infared beam operating distance


• Only powers on when the command is given to close the gates


• Alignment led to assist in the installation process


• Weather sealed with the supplied cover seals


• Easy screw down wiring termination


 

APC Mondo Wired Keypad with APP via Wi-Fi

The APC Mondo Wi-Fi Keypad can be used as a simple keypad access control device or alternatively as an advanced unit. Its special features allow the system to be operated by Pin Code, Swipe Tag and even remotley by APP whether on-site or off-site (anywhere in the world).

Supplied with a 10 meter cable roll it is wired back to the main control board of the system. Its also supplied with two swipe tags for PIN FREE access.
 

Key Feature Set:

• Full operational control by Tuya APP
• Resin Filled for best weatherproofing
• Low Power Consumption
• Backlit Touch Keys
• Up to 2000 Users
• Pin Code, Swipe Tag or DUAL AUTHENTICATION Swipe Tag then Pin Code
• Adjustable Relay Time from 0-99s or Latching ON/OFF
• Doorbell Contacts to connect to your doorbell system

Wired Double Push Button with Isolation Key

The wired double push button switch is a simple and easy to use method to operate the gate for full gate operation and also pedestrian function.

It is mounted in the general area of the gate and can be isolated by using the supplied keys without affecting the rest of the system, this is handy if you want to continue using the remotes or any other method of operation but wish to stop use of the push button itself.

The push button is wired to the control board using the supplied cable roll. If required the button can be upgraded to a wired keypad for higher access security using pin number for either the full gate operation or pedestrian function.

12-24V DC Operating Voltage Magnetic Gate Lock Access Control System - 280KG Weatherproof Electric Gate Lock

 280Kg Magnetic Lock with Z Mounting Bracket and 10m Cable Roll

Please note that the magnetic lock is not suitable for solar-powered systems

Specifications

Example of Magnetic lock with OPTIONAL Z Bracket

Electromagnetic Power Relay | DC 12V Power Relay with LED Indicator Light

Power Relay | DC 12V LED Indicator Light Electromagnetic Power Relay

Item Specifications

Contact type: DPDT (2NO 2NC)

Coil current: 10A

Coil voltage: 12V

Material: plastic, metal

Pin: 8 pin