Motorline MX93 Black Wireless Wall Remote Control (433.92MHz) | Indoor Push Button Switch, 2 Channels (3 buttons per channel)

Motorline MX93 Black Wireless Wall Remote Control (433.92MHz)

Motorline MX93 Black Wireless Wall Switch | Gate Opener Remote Control

Wireless wall remote switch for Motorline sliding & swing gate automation. 433.92MHz rolling code wall button for commercial & residential gate access control in Australia.

Indoor Wireless Wall Remote Control.

Cable-Free Gate Automation Control for Commercial & Residential Properties

The Motorline MX93 (Black) is a high-performance, surface-mounted wireless wall remote designed for direct control of Motorline gate opener systems. Engineered with a sleek matte black frame, the MX93 functions as a fixed wall push-button for sliding gate openers, swing gate actuators, and commercial access barriers—without the need to run trenching or conduit wires back to the main control board.

Operating on the secure 433.92 MHz rolling code (KeeLoq) frequency, the MX93 pairs directly with native Motorline control boards (such as the MC50, MC62, or MC60 series) and universal 433.92 MHz receivers.

Key Features

• Zero-Conduit Installation: Mounts instantly onto masonry walls, gate posts, glass entries, or reception desks without trenching or internal wiring.

• Rolling Code Security: Employs 433.92 MHz Keeloq rolling code technology to prevent signal cloning and unauthorised gate access.

• Dual-Channel Control: Configure separate buttons for full gate opening, partial pedestrian opening, or dual independent gate systems.

• Modern Black Finish: Professional aesthetic suited for commercial entryways, industrial parks, and modern residential driveways.

• Modular Switch Design: Fits standard switch plate frames (such as EFAPEL modular ranges) for a clean, integrated finish.

• High-Range RF Signal: Strong radio frequency penetration capable of triggering gate receivers from inside vehicles or buildings.

Detailed Gate Access Control Description

Streamlined Access Control Without Trenching Costs

Running hardwired push buttons to remote gate posts or indoor control desks often involves expensive concrete cutting, trenching, and conduit runs. The Motorline MX93 eliminates these costs. As a battery-powered RF wall transmitter, it provides the convenience of a hardwired wall switch with the speed of a wireless installation.

Tailored for Gate Automation & Security

The MX93 features dual independent channels, each equipped with dedicated activation keys. You can program Channel 1 to operate your main vehicular gate (full cycle open/close) and Channel 2 for a secondary gate or pedestrian access mode.

Designed for High-Traffic Commercial & Residential Sites

Built to withstand daily operation in commercial facilities, apartment complexes, and residential properties, the unit's matte black housing resists UV exposure, fingerprints, and daily wear.

Technical Specifications (Australian Standard)

Key Benefits for Gate Automation Installers & Facilities

• Drastically Cuts Install Time: Place gate controls anywhere—reception desks, security booths, or exit driveways—in under 10 minutes.

• Secure Signal Transmission: Rolling code encryption changes with every press, keeping gate access secure against code grabbers.

• Flexible System Integration: Pairs easily with Motorline gate control boards and third-party gate motors via a Motorline plug-in or external receiver.

• Pedestrian & Vehicle Dual Control: Set up one-touch commands for both full vehicular gate open and partial pedestrian gate access.

Frequently Asked Questions (Australia)

Can I use the Motorline MX93 as an exit button for commercial gates?

Yes. The MX93 is frequently mounted inside reception offices, security guard booths, or exit points so staff can remotely open perimeter gates for visitors without using handheld key fobs.

Will the MX93 work with my existing Motorline sliding or swing gate motor?

Yes. The MX93 is natively compatible with all Motorline external receiver and gate control boards that use 433.92 MHz rolling code receivers (such as the MC50, MC62, MC1, and MC60 control units).

Can one button open the gate completely and another open it partially for pedestrians?

Yes. Motorline gate control boards support "Pedestrian Mode." You can program Channel 1 of the MX93 to open the gate fully for vehicles, and Channel 2 to open the gate just 1 meter for pedestrian foot traffic.