The Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.
If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position.
Both sensors (transmitter and receiver) are wired back to the control box of the gate system using the supplied cable roll, alternatively a reflective sensor upgrade is available which will only require wiring from the sensor mounted at the control box.
Up to 15 Metres Infared beam operating distance
Only powers on when the command is given to close the gates
Alignment led to assist in the installation process
Weather sealed with the supplied cover seals
Easy screw down wiring termination
Universal Flashing light with Built In Antenna
Multiple options for operating voltage from 12V - 265V in AC or DC
Ultra Low Consumption of less than 3W
Two operating modes available: Flashing illumination (1HZ) or Solid Illumination
Bright Orange Casing for Great Day and Night time visibility
Built in booster antenna connection
Simple wiring using two core for the light and RG58/59 for antenna
IP54 outdoor Rating
Automatic Gate Caution Sign
Lightweight plastic caution sign to warn pedestrians and vehicles that there is an automatic gate in place. Size is 290mm x 290mm