4m x 1.1m Cantilever Gate Frame and Cantilever Sliding Gate Hardware Kit. Modular bolt-together frame with no welding required. Fast Australia-wide delivery. Complete Trackless Sliding Gate Kit with a 4m length, 1.5m-high gate frame, and cantilever sliding gate hardware set for a driveway trackless sliding gate system. CAIS CONNECT 60 - 4.0/1.1 Made in Europe

CAIS CONNECT 60 – 4.0 / 1.1 Complete Cantilever Gate Hardware Kit

The CAIS CONNECT 60 (CONNECT60-40-11) is a modular, high-precision cantilever sliding gate hardware kit engineered in Europe for quick, bolt-together assembly. Designed to span clear openings up to 4.0 metres with a frame height of 1.1 metres, this all-in-one set removes the hassle of on-site welding, heavy transport logistics, and complex steel fabrication.

Whether you are an Australian gate fabricator, fencer, or DIY installer, the CONNECT 60 system lets you assemble a rigid, heavy-duty cantilever gate in approximately 60 minutes. Because cantilever gates operate suspended above the driveway without ground tracks, this kit is ideal for sloped driveways, unpaved surfaces, or locations where dirt, gravel, and debris interrupt standard track wheels.

Key Features

• 100% Weld-Free Modular Assembly: Pre-drilled, precision-engineered components bolt together directly on site using standard hand tools.

• Smart Compact Shipping: Spans a 4.0m driveway opening yet ships in a compact 2.85m palletised package, significantly reducing freight costs across Australia.

• Heavy-Duty Load Capacity: Certified to support up to 125 kg of total infill weight (timber, aluminium, Colorbond®, slats, or mesh).

• Galvanised Protection: Manufactured using high-grade German steel with hot-dip galvanisation for long-lasting corrosion resistance in harsh Australian weather environments.

• Precision European Engineering: Includes twin 8-wheel carriage assemblies, adjustable tensioning systems, and guide hardware for whisper-quiet, smooth operation.

Key Benefits for Installers & Property Owners

• No Ground Track Required: Cantilever design eliminates concrete track cutting, track maintenance, and clearance issues caused by uneven ground, gravel, or leaves.

• Massive Time Savings: Build and hang a complete cantilever gate frame in under an hour without specialised welding gear.

• Customisable Aesthetic Finish: Raw galvanised finish can be powder-coated or painted post-assembly, accepting a wide range of infill options to match any property facade.

• Automation Ready: Works seamlessly with standard 24V or 230V sliding gate automation motors and tooth racks.

Technical Specifications

Complete Kit Package Contents

Each CONNECT60-40-11 complete hardware kit includes all hardware required to construct the main frame and cantilever system:

• FRAME 1.1 (1 pc) – Modular gate frame kit (1.1m height)

• KIT - BOLTS, NUTS (1 pc) – Complete bolt and nut assembly kit

• STAGE SZ 2,8 (2 pcs) – Bottom cantilever run tracks

• SPEED SE (2 pcs) – 8-wheel high-capacity carriage units

• DIAGON 60 (1 pc) – Adjustable tension bar

• JRS 30 (1 pc) – Roller guide plate

• DOCKER O (1 pc) – Adjustable end stop bracket

• PARK CSM (1 pc) – End stop bracket

• LAST S (1 pc) – End stop

• RUN S (1 pc) – End cap

• PILOT SN (1 pc) – End cap with screw

• PILOT SR (1 pc) – Small end cap

(Note: Support posts, concrete anchors, and infill materials are sold separately to suit specific site requirements.)

Frequently Asked Questions (FAQ)

What is the advantage of a cantilever gate over a standard tracked sliding gate?

A cantilever gate floats above the ground without touching the driveway. This means you do not need to lay a flat concrete ground track across your driveway entrance. It is ideal for sloped ground, gravel driveways, or areas where dirt and debris would clog a traditional track.

Can I install the CAIS CONNECT 60 kit myself without welding?

Yes. The CONNECT 60 system is specifically engineered as a 100% bolt-together kit. All frame components and bottom tracks come pre-drilled. You only need standard assembly tools to join the frame members and attach the hardware.

Does this kit include a support post?

No, the standard manufacturer kit includes the complete gate frame, cantilever beams, carriages, tension bar, end stops, and guide plates. Support posts or mounting brackets are ordered separately based on your mounting preference (e.g., existing posts, brick pillars, or concrete mounting).

What type of infill materials can I use on this 4m x 1.1m frame?

The system supports up to 125 kg of infill weight. Popular choices in Australia include aluminium slats, Colorbond® sheeting, timber pickets, horizontal WPC composite boards, or chain-link/welded mesh.

Can this cantilever gate kit be automated?

Absolutely. The bottom cantilever profile and modular frame accommodate standard gear rack installations, making it compatible with sliding gate motors in Automotion Plus Australia.

How does the kit ship so easily across Australia?

Unlike traditional 4m+ sliding gates that require oversized transport trucks, the CONNECT 60 utilises a smart modular split-frame design. The entire 4.0m clear opening gate kit packs down to a total transport length of just 2.85m, fitting onto standard freight pallets for economical nationwide delivery.