TWO FREE Sunvisor Remotes with all Automation Kits (RRP$110) || Now offering FREE shipping on orders above $900* || Australian Owned and Operated. Serving Aussie Homes & Businesses Since 2004 Gate Automation and Intercom 

  • Boom Gates & Barrier Gates Operator Trade Kit

Heavy Duty Standalone Solar Boom Gates & Barrier Gates Operator Trade Kit (upto 6m Arm Length)

Product SKU: BG-SOL-TK

  • In Stock

  • Freight DeliveryFreight Delivery
    This is a large item and will require a freight quote. Please add all items to your cart and continue through the checkout process for a complete freight delivery cost.
Get More Info.. Get More Info..

Kit Price:

$2,384.00

  • Boom Gates & Barrier Gate Automation Trade Kit | Access Control Security Systems

  • Kit Includes

    01 Left Side Operator including Arm (1m to 6m adjustable) & Resting Cradle(QTY: 1)
    02 APC Four Button Keyring Remote(QTY: 2)
    03 APC Retro Reflective Safety Sensor - for gate opening system safety Retro Reflective Gate Sensor(QTY: 1)
    04 APC Uno Multipurpose Battery Box(QTY: 1)
    05 17aH High Capacity Battery(QTY: 2)
    06 2m 2 Core 2mm Non-Shielded Cable(QTY: 1)
    07 APC Sun Power Series 12V/24V 10A PWM Solar Regulator(QTY: 1)
    08 24v 60 Watts Solar Panel(QTY: 1)
    09 Solar Panel Post & Bracket for APC 60 Watt Solar Panel(QTY: 1)
  • Customise Kit
  • Product Information

Customise your Kit

Upgrades are available for following items

Product Information

High Speed powered Boom Gate

 

left side boom gate



 

DC Powered Boom Operating System for security and traffic control management designed for entry and exit points at industrial complexes, body corporate managed complexes, factories, schools, car parks, caravan parks and more. The aluminum boom arm is lightweight and adjustable in size from 1m up to 6m in length. It is also supplied with pre installed reflective tape to help for visibility at night time.

The body itself is constructed from robust steel and finished in a smooth red powdercoat. The system is available in two diffrent orientations, a left side and a right side system depending on the best suited for the site and cabling structure.

 

DC Motor and Over Ride System

 

inside boom gate



 

The 80 Watt DC motor is very quiet and fast on opening and closing (~6 seconds per direction with a 6m arm and as little as ~2 seconds for a 1m arm), with precise limit encoder settings to ensure accurate positioning during every cycle.

Incase of a loss of power the system is equipped with a built in override to operate the boom gate into either the open and close position.

 

 

Balancing Spring System

 

 

boom operator top view
 

Included and pre-installed within the operator are TWO tensioning balancing springs to assist in ensuring a smooth jutter free closing movment. Tensions can be increased/decreased by adjusting preload if necessary or removing one of the springs when a shorter length arm is being used.

 

Control Panel

 

control panel for solar boom system
 

The internal control panel is fitted with on board push button switches for UP, DOWN and emergency STOP to assist with the installation process.

The control panel is completely pre-wired to the motor and features an on-board rectifier ready to connect the supplied external transformer.

 

 

 

24V 60 Watt Solar Panel (Upgradable to 120W or 180W)

 

 

solar boom gate





Mono Crystalline silicon solar cells with 3mm tempered glass and two sheets of tedlar-polyeaster-tedlar (TPT) and ethylene Vinyl acetate (EVA). This protects against moisture penetrating into the module. The solar panel is supplied with a fence mounting bracket system along with a pre-connected 5 metre cable (maximum cable distance is 20 metres), the solar panel is also fitted with a diode to prevent feed back from the batteries.

Important Note:Additional panels can be added in the upgrade options to enable the best charging rates of 120W (two panels) and 180W (three panels), this would be recommended for any of the lower states in Australia (due to winter weather conditions) or anytime the system would be used greater than 20 times per day to ensure the system never reaches a low capacity.
Specifications
Maximuim Power 60W
Optimum Operational Voltage 36V
Open Circuit Voltage 43.2V
60W Panel Dimensions 805 x 535 x 30mm

 

24V 17aH Battery System

 



 

Supplied with the automation kit the 24V 17aH battery system will allow for continued use of the gate system wether in day or night. The system can operate for up to one week of regular usage of 30 cycles per day without any charge from the solar panel (winter months/wet season) and will automatically recharge from sun light. When the system batteries are fully charged it will continue to float charge to keep the batteries topped up ready for use. In a case of extended use requirments or higher duty there are upgrade options to 33aH battery systems available.

 

System inputs, Outputs and Features


Automatic Close

  • ON/OFF (Max time. 120s)


Accessories Voltage Output

  • 24V DC


Compatible Safety Devices (N/C Circuit Latching)

  • APC-PE2000 Photocell
  • APC-RR11 Reflective Sensor
  • Induction Loop


Auxillary Inputs for Keypads, Buttons, Induction loops, Intercom integration etc.

  • Open (N/O Circuit Momentary)
  • Stop (N/C Circuit)
  • Close (N/O Circuit)
  • Push OPEN-STOP-CLOSE shared input (N/O Circuit)

 


Please choose one of the installation options based on your cabling structure

 

 

 

Left Side Option



left side boom operator
 

Right Side Option



right side boom operator

 

Resting Cradle

 

boom gate resting cradle

An adjustable resting cradle is supplied with the boom operator to help prevent damage caused by vandalism, the operator can be used without this item however its purpose is to help prevent the arm being pulled down or rested on whilst the operator is in the closed position. It also helps in the installation process as it allows for a simple closeby installation of the reflector from the reflective sensor package (if used).

 

APC Automation Systems FOUR Button Keyring Remote Control





Four-button remote control transmitter used for operating the boom gate system for OPEN - STOP - CLOSE commands. The remote can be paired to other APC boom gates on the same site or diffrent sites using any of the vacant or unused buttons.  

APC-RR-11 Retro Reflective Sensor

 

The retro-reflective Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.

If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position.

The sensor ( which is the transmitter and receiver) is wired back to the control box of the gate system using the pre-connected cable. There is no requirement for wiring across the driveway using this type of sensor.
 
  • Up to 11 Metres Infrared beam operating distance

  • Only powers on when the command is given to close the gates

  • Alignment & Misalignment led to assist in the installation process

  • Resin filled for the ultimate weatherproofing

Your Customised Kit Includes:

No Changes.

        Have Questions?Talk to the Experts(03) 9532 0804

        Dispatched in: Within One
        Business Day

        • Kit Quantity:
          • 1