|Low Consumption APC 24V Control Panel
This smart control panel is easy to connect and easy to set up, the setup button allows the gates to run one complete cycle and automatically sets a slow down for opening and closing.
The control panel is pre-wired with 1.2m cable with a 10amp power plug ready to plug into a standard weatherproof power point near the gate.
Fully Weatherproof Control Box
Deigned for all weather conditions, the control box is fully weatherproof with a seal. The swing hinged door on the control box allows for a compact and neat installation aswell as the option to secure the box with a padlock for added security. Multiple weatherproof cable glands for accessory and motor connection to the control box.
The APC 4 button Remote Controls that are supplied can be used to operate different functions supported by the four channel control board.
Button 1 is for operating a double gate
Button 2 is for operating pedestrian function on a double gate (opening one gate only)
Button 3 is for the party mode (to cancel the auto close for a particular cycle)
Button 4 is for operating a second lock (this can operate an extra lock fitted to a pedestrian gate)
PE Safety Sensor Connection
Energy star output, with zero consumption in standby to conserve power. PE Safety sensor connection is highly recommended.
Adjustable Auto-Close Timer
Adjustable Auto Close time up to 3 minutes. If automatic close is switched on, PE Safety Sensors are recommended as a safety precaution to stop the gate from closing if there is a car or object in the sensors view, these sensors can be found under the Sensors categeory on our website.
The automatic closing can be cancelled for a particular cycle using button 3 on any of the remote controls when expecting a visitor to arrive. For example, if expecting a visitor to arrive, number 3 can be pressed on the remote control whilst the gate is in the open position and the gate will remain open until the remote is pressed again.
Supplied with 2 x 12V DC 5Ah batteries connected in series (24V battery back-up). The back up batteries intended purpose is to allow minimal gate operation in a case of power loss. The back up batteries may not fully open or fully close the gate(s) during the battery operation but will allow for the user to easily access the property multiple times to use the clutch override feature of the gate motor. The back up batteries can run for mulitple days and will automatically recharge when power is restored.
Electric Lock and Magnetic Lock output
An Electric Lock (power on to unlock) or a Magnetic lock (constantly powered to stay locked/power off to open) can be installed on the gate.
Built in overcurrent adjustments allow for further adjustment to suit all gate sizes and weight.
A Wide Range of Controlling Options (these optional items and accessories can be found on our website)
Push Button Switches (wired or wireless)
Long Range Remote Control
Keypads (wired or wireless)
Automatic Timer (external device)
GSM Module (GSM telephone dialer)