Heavy Duty Single Gate Opener DC powered

AU $659.00

Heavy Duty Single Gate Opener DC powered

Product Price: AU $659.00

Product Code: APC-T575L-DC-JK

Jumbo Kit
 

Heavy Duty Single Gate Opener

24V DC Powered by internal transformer and with back up Batteries

 

Suitable for PULL to open or PUSH to open installation

 

This single gate opening system is a robust, tuff, long lasting and a quiet opening and closing system for single swing gates up to 3m in length. The motor can handle light and heavy gates. The T575 is a sleek design telescopic linear screw type actuator that is made of stainless steel with a cast alloy motor housing.
The motor is a durable and powerful 24V unit and the gear box is heavy duty and all gears are constructed of metal (no plastic, fibre or nylon).
The T575 is fitted with an emergency manual override to allow the user to open the gate manually in case of an emergency such as a power failure situation.

For further powerful features please see the control panel specifications below.
 
Heavy Duty Single Gate Opener

 

APC-T575DC-JK single gate opener kit contents:

- 1 x Heavy duty DC motor that is pre-wired with motor cables
- 1 x Override spanner
- 3 x Remote controls
- 1 x Control panel
- 2 x 12V back up batteries (1 x 24V)
- 1 x Entry push button switch with lock
- 1 x Exit push button switch with lock
- 1 x Photo electric sensors
- 10m 2 Core Cable for the push button switches
- 10m 4 Core Cable for photo electric sensor
- 1 x Post mounting bracket
- 1 x Gate mounting bracket
- 1 x Post mounting bracket
- Instruction manual

 

 

 
Emergency Override
Motor Exposed
 
Heavy Duty Single Gate Opener
Heavy Duty Single Gate Opener
Built in easy manual override
in case of emergenecy such as power failure.


Powerful 24V Motor with all metal
gears as shown in the picture above.

 

T575 Actuator Dimensions
 
Heavy Duty Single Gate Opener
 
 
APC Smart Control Panel
 
Heavy Duty Single Gate Opener
 
 
APC Smart digital technology 24v DC Swing gate control panel :The smart control panel is easy to connect and easy to set up. The setup button allows the gates to run one complete cycle and automatically sets slow down for opening and closing.

Control Panel Features:
✓ Fully weatherproof with a seal.
✓ Hinged door with a padlock slot for added security.
✓ Over current adjustments.
✓ Adjustable Auto-Close time up to 3 minutes.
✓ Party mode: The automatic closing can be cancelled using one of the remote control buttons when expecting a visitor to arrive.
✓ Second gate lock opening supported for a service gate (250mA max.). This is an extra feature. Using the second lock output will allow the user to power and control a second electric striker installed on a service gate the second lock is powered and controlled from the control panel and via one of the remote control buttons.
✓ PE Sensor connection input: Energy star output, with zero consumption on standby to conserve battery power.
✓ Smart Opening & Closing LED indicators: Green LED on during opening and Red LED on during closing.
✓ Control Panel Power: This control panel is pre connected with a 10amp power plug and is ready to plug into a power point.

Controlling options:
(any or all of the following may be connected to operate the gate)
- Remote controls (supplied)
- Entry push button with isolation key switches (supplied)
- Exit push button switch (supplied)
- Keypads (Optional extra)
- Exit/entry sensors (Optional extra)
- Intercom system with dry contact output (Optional extra)
- Automatic switching timer (Optional)
- GSM switch telephone dialer (Optional extra)
 
APC-RC4BK Remote control
  
Heavy Duty Single Gate Opener
Rolling code 433.92MHZ.
The remotes supplied have 4 buttons, 1 and 2 can be used for the gates.
Buttons 3 and 4 can be used for the party mode and second lock or alternatively they can be programmed to a compatible second gate opener or a garage door(s). A compatible 2 channel reciever is available to interface to any garage doors. Please see remotes and recievers in our store to find this add on reciever for the garage door.
 
Entry Push Button Switch with lock
Heavy Duty Single Gate Opener
This entry switch is fitted with an isolation key that enables the owner to enable or disable the operation of the entry switch,
The isolation key switch is used to turn ON and OFF the operation of the push button switch(s).
Example: The user can switch the key switch OFF using the supplied key to de-activate the usage of the push button switch(s) or switch ON to allow visitors access to the property.
The push button switch is weather resistant, neat appearance, compact size, black powder coated cast alloy construction with Silver ABS plastic face plate, it can be easily installed on any surface outdoor or indoor.
This switch can be wired to the push button terminal on the control panel using a Fig 8 (2 wire cable).
 
Exit Push Button Switch
Heavy Duty Single Gate Opener
The exit button can be used by the owner or the visitor to exit.
The switch is weather resistant, neat, compact size, Black powder coated cast alloy construction with Silver ABS plastic face plate, it can be easily installed on any surface outdoor or indoor.
This switch can be wired to the push button terminal on the control panel using a Fig 8 (2 wire cable).
 
APC-PE2000 Photo Electric Sensor
 
Photo electric sensor function:
If PE sensors are installed:
- The gate will not close while the beam is obstructed.
- The gate will stop and re-open if an object obstructs the beam.
The sensors are wired back to the control panel using the supplied cables.
Specifications:
Detection technology: Infrared
Range: 15m max.
Frequency: 1.92Khz
Power: 12-24V AC/DC
Input: RX 15mA, TX 30mA
Operating temperature: -20 to 70 degrees
Relay output: 1Amp max 30V
Dimension: 49.2 x 76 21mm
Heavy Duty Single Gate Opener
 
Suitability

This automatic gate opener is suitable for:
→ Single gate up to 3m wide gates and not exceeding 250kg max.
→ Free flowing gates with good hinges.
→ Gate installation with sufficient space beside the gates for the folding arms to work correctly, (please see fixing example below
→A power point near the gate (within 1m) or see other power options.
 
Important Requirements

Power Source:
This gate opener has a built-in internal transformer placed behind the control board in the control panel, the transformer is pre wired with an AC 240 power plug, so the control panel is ready to plug-in into a standard weatherproof 10amp power point near the gate,
Other powering options of external transformer or solar systems available, call 0414 247 359 for further assistance and understanding of the powering options.
 
 
Specifications
 
 
Duty Cycle
25%
Power supply
240v AC to the Control Panel
Power to motor
24v DC
Battery backup
2 x 12v 5Ah (24V x 5Ah)
Average power consumption
1.7A
Motor rating
40W max
Manual override
Via override keys supplied
Working temperature
-10 - +70 degrees
Actuator length when retracted
740mm
Actuator length fully expanded
1080mm
Maximum stroke
430mm
Recommended stroke
350mm Max.
Opening/closing running time
12-15 seconds
Gates size
3m max
Gate weight
250kg max
PE sensor power
24Vac, 3W max.
RF frequency
Rolling code 433.92mhz
 
Pull to Open and Push to Open
 
Heavy Duty Single Gate Opener
 
Heavy Duty Single Gate Opener
 
 
Prices & GST:
All Prices includes GST
 
Delivery:
The automatic gate operating system will be delivered via Australia post couriers, the products will be registered and insured.
The purchased product will be dispatched immediately on the day of purchase if the order and payment is completed before 12am otherwise it will be dispatched the following day.
 
Pickup:
Customers can pickup the automatic gate opener from factory 53 Cochranes Road Moorabbin, Victoria 3189.
 
Warranty:
All the gate openers supplied are pre tested and of good quality long lasting and have a 12 Months back to base warranty on the complete system.