Complete Telescopic Sliding Gate Hardware Kit for 4m Cladded Gate with 78mm Recess Mounted Wheels and More

AU $735.60

Complete Telescopic Sliding Gate Hardware Kit for 4m Cladded Gate with 78mm Recess Mounted Wheels and More

Product Price: AU $735.60

Product Code: TSGK-RM-4-C

Complete Telescopic Sliding Gate Hardware Kit 

Kit Contents

1 x Set of Telescopic Sliding Gate Hardware
12 x 1m Fully Galvanized Heavy Duty Floor Track
4 x 78mm Recess Mounted Heavy Duty Wheels With Dual Bearings.
4 x 1m Aluminium "Z" Section for Sliding Gates.
2 x "C" Channel
2 x Nylon Block
2 x 115mm Gate Stop.
1 x 70mm U Guide Gate Keeper.
Bag of Screws/Bolts
Installation Manuel


 

The following video illustrates the telescopic sliding gates use

 
Product Code: TSGK-RM-4-C

Heavy Duty Telescopic Gates Hardware Kit

This is a complete telescopic sliding gate hardware installation kit with all the parts required for a 4m telescopic sliding gate with Cladding.

Example of Telescopic Sliding Gate Leaf Size Calculation: If the driveway opening is 4000mm, then 2 x 2350mm gates leaf for telescopic gate systems, (2x2000mm + add 350mm on each leaf) The formula for telescopic sliding gate calculation is: Driveway opening size divided into 2 then add 350mm for each leaf.

This kit is suitable for 4m telescopic sliding gates with uneven surfaces for example gates with pickets or colourbond on the face of the gate and regular gates.

High quality galvanised compact yet very strong conversion kits with heavy-duty stainless steel 4mm cable, and this kit is complete and ready to install for 4m telescopic sliding gates. See kit contents above.

What is a Telescopic Gate:

Traditionally a 4m sliding gate requires another 4m of space away from the driveway opening for the gate to slide into.
The telescopic systems will almost halve this space required for the gate to slide into, this is because the telescopic systems enable the second gate to be pulled by the first gate once the first gate starts to move.

Telescopic Sliding Gate Leaf Size Calculation: The formula is: Driveway opening size divided into 2 then add 350mm for each leaf.

Example: if the driveway opening is 4000mm, then 2 x 2.35m gates (2x2000mm + add 350mm on each leaf)
Please see the above telescopic gate systems kit contents:

Key Features of Telescopic Gate:

Undermounted below gate (using flat-mount wheels) or face-mounted to the gate (using flat-mount or recess mount wheels)
Sealed bearings not bushings
Three cable tensioning points to allow an easier installation (other suppliers only one tensioning point)
Adjustable bracketing provides for the use of recess mount or flat mounted wheels
Low profile system (does not protrude above bottom section of the gate using 80x40 or greater)
All hard parts are galvanised.
All assembly screws are galvanised
Telescopic cable is stainless steel

Telescopic Gate System

Example of an assembled telescopic system as it is installed on the gates.Telescopic Sliding Gate Hardware

Floor Track
12 x 1m fully galvanised heavy-duty floor track.

This 1m gate track is heavy duty 3mm thick.

Please Note: 2m and 3m track sizes are available for pickup.

Complete Sliding Gate Hardware Kit for 4m Cladded Gate with 78mm flat mounted wheels and more
Wheels
4 x 78mm Recess mounted heavy-duty wheels with dual bearings.

The wheels are fitted into the underside of the bottom gate frame, the wheel will raise the gate by approx 27mm from the sliding gate track.
Complete Sliding Gate Hardware Kit for 4m Cladded Gate with 78mm Recess mounted wheels and more
U Guide
1 x 70mm U Guide Gate Keeper.

This "U" Guide-stop is suitable for gates up to 70mm thick.
The "U" Guide is installed at the closing end of the sliding gate.
Complete Sliding Gate Hardware Kit for 4m Cladded Gate with 78mm flat mounted wheels and more

Gate stop
2 x 115mm Gate Stop.

Heavy-duty anodised metal with rubber end for the open position.

Complete Sliding Gate Hardware Kit for 4m Cladded Gate with 78mm flat mounted wheels and more

Sliding Gate Block with "C" Channel
2 x Nylon Block
2 x "C" Channel


This Nylon gate block and "C" channel is suitable for gates with uneven surfaces, for example, gates with pickets. The "C" channel is attached to the post, and the nylon block fits into the "C" channel and to the "Z" channel which is mounted to the top of the sliding gate.

Complete Sliding Gate Hardware Kit for 4m Cladded Gate with 78mm flat mounted wheels and more

"Z" Channel
4 x 1m Aluminium "Z" Section for Sliding Gates.
Please Note: 2m and 3m Aluminium "Z" Section sizes are available for pickup.
This Aluminium "Z" Section is the ideal choice for gates:
- With an incline or decline (not on level ground)
- With pickets or cladding on the face of the gate making an uneven surface on the gate
- With spears at the top of the gate
- With an arched top design

Complete Sliding Gate Hardware Kit for 4m Cladded Gate with 78mm flat mounted wheels and more

Example of how the Z Section works when installed with Block & "C" Channel

Complete Sliding Gate Hardware Kit

Motors Available For Telescopic Gate Kits

Please Note: The motor system for the telescopic gate system MUST be an extra heavy-duty motor. The weight capacity of the motor MUST equal to 5-6 time the actual weight of the 2 gates or frames being instaled. See the below examples.

Approximately Gate WeightRecommended MotorMotor Capacity
100 KG - 130 KGAPC-SG801AC800 KG
131 KG - 300 KGAPC-SG1600AC1600 KG
301 KG - 500 KGAPC-SG3000AC3000 KG

The below motorizing options are available in various kits.

Trade Kits

Jumbo Kits

Super Kits

Wireless Controller Kits

✔ Gate Motor
✔ Remotes
✔ Gear Rack
✔ Limit Switches
✔ Mounting Plate
✔ Gate Stop
✔ U Guide
✔ Brackets & Cabling
✔ Gate Motor
✔ Remotes
✔ Wired Entry & Exit Press
   Button Switches
✔ Safety Sensors
✔ Gear Rack
✔ Limit Switches
✔ Mounting Plate
✔ Gate Stop
✔ U Guide
✔ Brackets & Cabling
✔ Gate Motor
✔ Remotes
✔ Wired Entry Keypad
✔ Wired Exit Press Button
    Switch
✔ Safety Sensors
✔ Gear Rack
✔ Limit Switches
✔ Mounting Plate
✔ Gate Stop
✔ U Guide
✔ Brackets & Cabling
✔ Gate Motor
✔ Remotes
✔ Wireless Entry Keypad Exit
✔ Wireless Exit Press Button
    Switch
✔ Safety Sensors
✔ Gear Rack
✔ Limit Switches
✔ Mounting Plate
✔ Gate Stop
✔ U Guide
✔ Brackets & Cabling

800kg AC Powered Sliding Gate Opener Trade Kit

800 KG Capacity
APC-SG801AC-TK
AU $619.00 AU $495.00

800kg AC Powered Sliding Gate Opener Jumbo Kit

800 KG Capacity
APC-SG801AC-JK
AU $800.00 AU $640.00

800kg AC Powered Sliding Gate Opener Super Kit

800 KG Capacity
APC-SG801AC-SK
AU $938.00 AU $750.00

800kg AC Powered Sliding Gate Opener Wireless Controller Kits

800 KG Capacity
APC-SG801AC-WCK
AU $950.00 AU $760.00

1.6 Tonne Extra Heavy Duty Sliding Gate Opener Trade Kit

1600 KG Capacity
APC-SG1600AC-TK
AU $980.00 AU $784.00

1.6 Tonne Extra Heavy Duty Sliding Gate Opener Jumbo Kit

1600 KG Capacity
APC-SG1600AC-JK
AU $1,088.00 AU $870.00

1.6 Tonne Extra Heavy Duty Sliding Gate Opener Super Kit

1600 KG Capacity
APC-SG1600AC-SK
AU $1,216.00 AU $1,011.00

1.6 Tonne Extra Heavy Duty Sliding Gate Opener Wireless Controller Kit

1600 KG Capacity
APC-SG1600AC-WCK
AU $1,224.00 AU $979.00

3 Tonne Extra Heavy Duty Sliding Gate Opener Trade Kit

3000 KG Capacity
APC-SG3000AC-TK
AU $1,276.00 AU $1,020.00

3 Tonne Extra Heavy Duty Sliding Gate Opener Jumbo Kit

3000 KG Capacity
APC-SG3000AC-JK
AU $1,384.00 AU $1,107.00

3 Tonne Extra Heavy Duty Sliding Gate Opener Super Kit

3000 KG Capacity
APC-SG3000AC-SK
AU $1,512.00 AU $1,209.00

3 Tonne Extra Heavy Duty Sliding Gate Opener Wireless Controller Kit

3000 KG Capacity
APC-SG3000AC-WCK
AU $1,520.00 AU $1,216.00