12V DC Flood Proof Sliding Gate Motor
Durable and strong motor with built-in limit switches
Built in manual override for emergencies
Metal Pinnion (NO PLASTIC OR NYLON)
Strong Metal Cut Pinnion ensuring the highest durability
DC Motor & Steel Worm Drive
12V DC Motor with Steel Worm Drive (no plastic or nylon)
Metal Transfer Gearbox (NO PLASTIC OR NYLON)
Strong Metal Transfer Gearbox working in conjunction with the above metal pinnion
Reliability & Durability
The APC-SG12W Heavy Duty 12V DC motor is a powerful unit built from reliable components consisting of all metal gears (no nylon or plastic) unlike most competitors models. The DC motor is fitted with a steel worm drive and works in conjunction with the metal transfer gearbox and metal pinnion to ensure the highest durability and strength in the operation of the sliding gate.
This Sliding gate motor is IP57 rated meaning that it can handle temporary water immersion of up to 1 metre (3 feet) of fresh water for up to 30 minutes. This makes it the ideal choice for users wanting maximum protection to their sliding gate motor and for areas which are flood prone. The motor does not have any protruding components and is completely concealed and water tight with all mechanical components built in undernath the motor cover. Please see further information below.
Magnetic Limit switches
The motor is fitted with magnetic limit switches to ensure two things:
1. A water tight seal around the motor to stop dust, water and insects from getting into the motor as there is no open areas or protuding components such as limit switches (magnetic limit switches built in underneath the motor cover).
2. Wear and Tear is minimised due to less mechanical workings.
Easy to use manual override with 3 keys supplied, simply unlock with the key, pull the lever and the gate will be free and can be opened manually in the case of an emergency or a power outage.
12V DC Motor with All Metal Gears (No Nylon or Plastic)
This Heavy Duty 12V DC motor is constructed of all solid metal gears. The worm drive, gearbox and pinnion are all constructed of solid metal ensuring strength and durability. Please see pictures above.
Gate Weight and Width
This gate motor can handle a sliding gate up to 200kg in weight OR 2.5m in width each gate, but this weight capacity is variable and based on the width of the gate, the design (open frame, cladded, colour bond sheet) and how level the ground is. All of these factors which differ in every installation must be taken into account and will determine the final capacity that this motor can handle for that particular installation.
|Input Power||12V DC|
|Operating Temperature||-20° - +55°|
|Maximum Weight||200kg each (please see above)|
|Maximum Width of Gate||2.5m each(please see above)|
The CBSW12 series smart control panel is an easy to connect, simple to setup and feature rich control box vast amount of features as listed below:
Fully weatherproof with a seal
Pre Connected Weatherproof Glands for Wiring Connections
Hinged door with a padlock slot for added security
Low Voltage Transformer with a 20m Cable (extendable up to 80m)Automatic Setup Feature to learn the Ramp Up and Slow Down points of the gates
Adjustable Over current adjustments
Safety Sensor connection input
Automatic Courtesy Light Output
Party mode: The automatic closing can be cancelled using button 3 on the remote control buttons when expecting a visitor to arrive, reversing a trailer and numerous other uses.
Service Gate Function (12V 250mA max.). Using the second lock output will allow the user to power and control a second electric striker installed on a pedestrian access gate the second lock is powered from the control panel and controlled using button 4 on the remote. APC Wired and wireless Accessories can also be use to control the Lock 2 function.
Constant 12V DC Accessories Output
Switched 12V DC Output for closing direction (used for safety devices to conserve power, powered on when required)
Open/Stop/Close Inputs for Single Gate Operation and Double Gate Operation
Loop Detector Connection Input for an Open Only Toggle along with a return to open if closing
Smart Opening & Closing LED indicators: Green LED on during opening and Red LED on during the closing
Automatic Electric & Magnetic Lock Output
Any or all of the following may be connected to operate the gate
Entry and Exit push button with isolation key switches (Wired and Wireless Options Available)
Keypads (Wired and Wireless Options Available)
Intercom system with dry contact output
Automatic switching timer
WiFi Control System (App Based Control)
GSM Control Systems (Mobile Call/SMS based Control)
12V External weatherproof designed to be used in a low voltage cabling application of up to 80 meters, supplied with a pre-connected 20 meter cable this is a perfect solution when running mains power to the gate is not a viable option due to costs, difficulty or just simply to DIY.
Supplied with the automation kit the back up battery system will allow for continued use of the gate system for up to three days of regular use and will automatically recharge upon power restoration. Whilst the system is powered it will continue to float charge to keep the batteries topped up ready for use.
|Power Input||12V AC (240V to 12V Transformer Pre wired with 20m Cable)|
|Rectification||On Board Bridge Rectifier|
|Motor Output Voltage||12v DC|
|Working temperature||-10° - 50°|
|RF||APC Rolling code 433.92mhz|
|Lock Output (Primary)||12-18V DC (Depending on Configuration)|
|Lock Output (Secondary)||12V DC|
|Auxiliary Inputs||0V Momentary Pulse|
|Accessories Voltage||12V DC|
|Over current||1A to 5A|