Control Board Features

Low Consumption APC 24V Control Board
This smart control panel is easy to connect and easy to set up. It is built-in underneath the motor cover allowing for a simple and compact installation.

Remote Controls
The APC 4 button Remote Controls that are supplied can be used to operate different functions supported by the three-channel control board.

• Button 1 is for full gate operation
• Button 2 is for using the pedestrian function (partial opening of the sliding gate)
• Button 3 is for the party mode feature (to cancel the auto close for a particular cycle - for automatic close users)
• Button 4 is vacant allowing the user to pair in an APC receiver into another device such as a garage door.

PE Safety Sensor Connection
Energy star output, with zero consumption in standby to conserve power. PE Safety sensor connection is highly recommended.

Adjustable Auto-Close Timer
Adjustable Auto Close time up to 3 minutes. If the automatic close is switched on, PE Safety Sensors are recommended as a safety precaution to stop the gate from closing if there is a car or object in the view of the sensors.

Party Mode (For Automatic Close Users)
The automatic closing can be cancelled for a particular cycle using button 3 on any of the remote controls when expecting a visitor to arrive. For example, if expecting a visitor to arrive, number 3 can be pressed on the remote control whilst the gate is still in the open position and the gate will remain open until the remote is pressed again.

Motor Speed Adjustments
Adjustable motor speed allowing the user to adjust the fast and slow speeds of the motor.

Overcurrent Adjustment
Built-in overcurrent adjustments allow for further adjustment to suit all gate sizes and weight.

A Wide Range of Controlling Options(these optional items and accessories can be found on our website)

• Push Button Switches (wired or wireless)
• Long Range Remote Control
• Keypads (wired or wireless)
• Safety Sensors
• Intercom System
• Automatic Timer (external device)
• "APC Connect 4" Receiver Switch - 4G/3G/GSM Compatible (Optional extra)

Connection of a DC light
Connection of a DC light using up to 20W, this output is active during the opening and will stay active until the gate is closed.

Please note:
Connection of a DC light requires an additional power supply to be used due to the high power consumption, therefore it is most likely not possible to use one of these accessories in a solar-powered application.
Please feel free to contact us on (03) 9532 0804 for further assistance if required.