Suitable for Colorbond, Pickets, Paneling, Pailings, Decking Material and many more materials
With its Soft Start/Soft Stop feature the APC Typhoon brings the gate up to operating speed and down to a stop gently significantly increasing the motors operating life whilst decreasing the jolting movement incurred when the feature is not available.This feature can also simply be turned off if not required.
The 450W Internal motor allows for an 800kg capacity making it the ideal candidate for the majority of gate installations.
Ready to go the on board receiver will accept the entire range of current APC High Security wireless control systems and accessories such as wireless keypads, push buttons and an extensive range of remotes. Perfect for a simpler of no wiring needed installation.
Ultra compact, sleek design and with some clever re-arrangement the APC Typhoon is one of the smallest physical footprint systems on the market with zero compromise in the motor or gearbox size. The bottom cast alloy section is powder coated in a ultra durable hammer tone grey finish whilst the top cover sports a lighter gloss grey making it perfectly neutral and suited for any garden or driveway
With separate open and close inputs as well as an shared open/close input the APC Typhoon will support just about any wired accessory and can be connected for a specific direction or to operate both. Perfect for Keypads, Push buttons, Induction Loops or Smart Devices such as Wi-Fi switches or GSM controllers.
Pre wired with the AC power cable and fitted with an on board low voltage transformer means the accessories connections are low voltage (18V DC) and safe to connect.
|Maximum Weight of Gate||800kg (Telescopic Gates 200KG PER Gate)|
|Maximum Width of Gate||6m (Telescopic Gates 2m PER Gate)|
|The working temperature of the motor||-5° ~ +65° C|
|Open (Close) speed||12m/min|
|Voltage output||18V DC, Only devices with a parameter of 12-24V DC operating range can be connected to the system|
|Light output||240V Light, 30 Watts or Less|
|Accessories input||Open Only
|Can I operate this sliding gate motor manually?||
|The motor is fitted with a manual override and supplied with a key to manually disengage the motor|
|Can I use this system to operate a large gate?||
|This system can handle a sliding gate up to 6m wide and 800kg in weight.|
|Are the motor & control panel all in one?||
|Both the motor and the control panel are housed under one casing making the motor easy to install and very neat & compact|
|Can I use push buttons to operate this system?||
|Both wireless & wired push-button switches can be used to open/close the gate motor|
|Can I use keypads to operate this system?||
|Both wireless & wired keypads can be used to open/close the gate motor|
|Can I connect a safety sensor to this system?||
|Photoelectric and reflective safety sensors can be connected to this system to stop the gate from closing if there is a vehicle or person in the way of the gate|
|Can I connect an intercom system to this gate system?||
|A range of different intercoms can be connected to this system allowing the intercom to unlock the gate motor from a monitor inside the house or via an app on your smartphone|
|Can I operate this gate system from a remote location?||
|A GSM Receiver or Wi-Fi Receiver can be connected to the system allowing programmed users to open/close the gate system from a remote location.|
|Does this gate system automatically close?||
|When the automatic close timer is enabled, and photoelectric safety sensors are installed the gate will automatically close|
|Can I connect a light to the system?||
|The system has a 240V light output meaning a 240V light 30 Watts or less can be connected and will operate when the gate is opening/closing.|
The supplied 45° angle mounting wedge allows for the best alignment during the installation to point the outdoor station in the direction of the guest when the outdoor station is forward facing and the guest may be standing to its left or right side.
The wedge is a universal mount allowing for both left facing and right facing setups.
|Exit Button Input||Yes|
|Swipe Tag Type||IC Tag|
The eyevision Intelli Series intercom is a feature rich state of the art intercom system boasting every feature requested from an intercom syste (and much more...).
Any visitor calls can be recieved by the APP on your smartphone or table along with the monitor at the same time with a large feature set from the APP and also the indoor monitor. No extra modules are required to connect to the internet as the WF 7 slimline indoor monitor has built in Wi-Fi and is able to connect directly to your homes 2.4GHZ Wi-Fi connection.
Two oudoor stations can be connected for front gate/front door/back door (with motion detection & recording) along with up to SIX monitors within the home allowing for the visitors call to be answered from any station and transfered to a diffrent station if required. Within the home you can selectivly intercom between any of the installed indoor monitors. All monitors connected into the system can view any of the installed CCTV camers (up to TWO can be connected into the system). If the CCTV cameras are interconnected with a seperate alarm sensor the system can have alarm recording events occur which can be saved directly to a micro SD card.
The intelli series can have a common release connected directly to the monitor allowing for simultaneous front gate - front door release making it easier than ever to let a guest in without having to switch between menus or running to the door.
System Capacity & Capabilities
Indoor Monitor Base Features
Special Features (Micro SD Required)
|Screen Size||7" 1024x600 AHD LCD Display|
|SD Card||Micro SD (Not Supplied) Class 10 up to 32GB|
|CCTV Input||Maximum 2|
|Alarm Sensor Input||Maximum 2|
|Outdoor Unit Input||Maximum 2|
|Indoor Monitors||Maximum 6|